歡迎訪問常州市邦源幹燥機械有限公司!
常州市邦源幹燥機械有限公司

Changzhou bangyuan drying Machinery Co.,Ltd.

福利在线免費服務福利在线:18261199989
福利在线
    常州市邦源幹燥機械有限公司
    福利在线:计先生 18261199989
    電 話:0519-88913680
    傳 真:0519-88913680
    郵 箱:2870078927@qq.com
    地 址:江蘇省常州市鄭陸鎮焦溪工業園

雙錐真空幹燥機中^核心部件解析

发布时间: 2018-03-13
关键词:雙錐真空幹燥機中^核心部件解析
幹燥機是雙錐真空幹燥機系統的核心部分,也包含介質加熱和循環,真空和溶劑回收組分。幹燥器由一個封閉的熱套管組成充當幹燥室的容器。通常由不鏽鋼制成或特殊合金來滿足您的要求,容器的容量通常爲1至500立方。

The dryer is the core part of the double cone vacuum dryer system, and also contains the medium heating and circulation, the vacuum and the solvent recovery component. The dryer consists of a closed heat sleeve that acts as a container for the drying chamber. Usually made of stainless steel or special alloy to meet your requirements, the capacity of the container is usually 1 to 500 cubic meters.

  

  
  介質加熱和循環部件。您可以使用幾種熱源中的任何一種來提供熱量媒體到熱套,取決于你的溫度和BTU的要求。您可以管廠蒸汽給夾套或,以避免冷凝問題,使用加熱元件和熱量加熱流體(通常是水或油)以用于夾套。熱介質流經幹燥機熱夾套將熱量傳遞至幹燥室。

Medium heating and circulating components. You can use any of several heat sources to provide heat media to the heat sleeve, depending on your temperature and BTU requirements. You can pipe the plant steam to the jacket or to avoid the condensation problem, using heating elements and heat to heat the fluid (usually water or oil) for the jacket. The heat medium flows through the dryer hot clamp to transfer the heat to the drying chamber.

  

  

  正確指定熱套和介質加熱和循環部件並確保介質流量和壓力與您的夾套相容對于成功的真空非常重要烘幹。請注意,在夾套中使用蒸汽或加壓熱水或油通常需要高壓外套設計(處理高于1大氣壓的正壓)。高壓夾套允許更好的介質流量和傳熱通過夾套到幹燥器壁,但夾套設計將需要滿足ASME規範對于未燃壓力容器的嚴格要求。真空和溶劑回收組件。真空管路從幹燥機運行到真空源,通常是一個真空泵,它可以降低幹燥器內的氣壓。真空泵是主要負責烘幹機內的真空度,只要容器焊接合適,真空管線被有效地密封到容器。^常見的類型是液環式真空泵。

Correctly specified thermal sleeve and medium heating and circulating components and ensure the medium flow and pressure and your jacket is very important for the success of the compatibility of vacuum drying. Please note that the use of steam or pressurized hot water or oil in the jacket usually requires a high pressure jacket design (the treatment is higher than the pressure of 1 atmospheric pressure). The high pressure jacket allows better medium flow and heat transfer through the jacket to the dryer wall, but the jacket design will meet the strict requirements of the ASME code for unburned pressure vessels. Vacuum and solvent recovery components. The vacuum pipeline runs from the dryer to the vacuum source, usually a vacuum pump, which can reduce the air pressure in the dryer. The vacuum pump is mainly responsible for the vacuum in the dryer. As long as the container is welded properly, the vacuum pipeline is effectively sealed to the container. The most common type is the liquid ring vacuum pump.

  

  

  蒸氣是由位于真空泵和幹燥器之間的冷凝系統捕獲。雙錐回轉真空幹燥機蒸氣系統通常包括一個預濃縮器和一個冷凝罐。預冷凝器冷卻以冷凝蒸汽,冷凝水或溶劑被收集在冷凝液接收罐中。泵將水箱中的冷凝水除去。

Is captured by a vapor condensation system located between the vacuum pump and dryer. Double cone rotary vacuum dryer steam system usually includes a pre concentrator and a condensate tank. The pre condenser is cooled to condensate steam, condensate water or solvent is collected in the condensate receiving tank. The pump removes the condensate from the water tank.

  

  

  在某些情况下 - 例如溶剂有毒或有害并且会造成环境危害如果未经特殊处理即丢弃 - 溶剂也可用于液环中的密封剂真空泵。这需要为具有闭环的冷凝系统装备真空密封胶布置。

In some cases - such as solvent toxic or harmful and will cause environmental harm if untreated discarded solvent can be used in liquid ring vacuum pump sealant. This needs to be equipped with a vacuum sealant for a closed loop condensing system.


Top